Motor Retainers have been moved to the Motor Retainer page.
Below are Linear & Standard Launch Lugs, Kwik Links, U-Bolts, Etc.

You`ll find our reusable rivets, kwik-links, launch lugs, and other rocket related hardware on this page.

.

Part#DescriptionCostQty.

RIVETS-NAT
Reusable Plastic Rivets:
Ideal for mounting removable couplers in airframes, securing hatches and securing nose cones to payload sections. 24 rivets to a package.
  • Holds securely to kraft phenolic, fiberglass, plastic tubing and nose cones
  • Once holes are drilled, no tools are required to install the rivets. To remove the rivets, pull cap up with your fingernail or small knife
  • Eliminates wood backing strips that screws require
  • Will not strip hole
  • Low profile (less than 1/16")
  • Rivets are intended for combined material thickness from 0.100" to 0.130"
  • DRL-5/32 drill bit sold separately
 $4.95
RIVET-BLK
Reusable Plastic Rivets - Black:
Same as above, but black in color
 $4.95
DRL-5/32
5/32" Drill bit for use with plastic rivets listed above
 $3.09
LL-0.38
Launch Lug, thin-wall brass tubing precut to 3"3/8" by 3"  0.275 oz.
 $1.59 TEMPORARILY OUT OF STOCK
LL-0.50
Launch Lug, thin-wall brass tubing precut to 3"1/2" by 3"  0.325 oz.
 $1.69
LL-0.75
Launch Lug, thin-wall brass tubing3/4" by 12"  4.7 oz.

.

 $4.19
LRL-10-2
Linear Launch Rail Lugs (2 lugs/pkg) - The new PML Linear Rail Lugs are made of durable yet light-weight urethane. They glide smoothly and securely along both the Blacksky ProRail (TM) and the standard 1" (#1010) 80/20 (TM) brand rail. They have the same frontal area as rail buttons but with much greater surface area so that they can be mounted using epoxy alone in those situations where a screw would interfere with internal components. The lugs can also be mounted using two flathead screws for added strength. The channeled base allows for a conformal fit to any airframe 1.5” dia. and larger. (We recommend a #6 flathead screw, 1/2" long, for attaching the rail lugs.)
$5.95
LRL-10-12
Linear Launch Rail Lugs - 12 lugs, enough for 6 rockets. Equip your fleet at a reduced price!

.

 $25.95
LRL-15-2
Large Linear Launch Rail Lugs (2 lugs/pkg) The new PML Large Linear Rail Lugs are made of durable yet light-weight urethane. They glide smoothly and securely along the standard 1.5" (#1515 and #1530) 80/20 (TM) brand rail. They have the same frontal area as rail buttons but with much greater surface area so that they can be mounted using epoxy alone in those situations where a screw would interfere with internal components. The lugs can also be mounted using two flathead screws for added strength. The channeled base allows for a conformal fit to any airframe 3.0” dia. and larger. (We recommend a #8 flathead screw, 3/4" long, for attaching the rail lugs.)
$12.95
LRL-15-6
Large Linear Launch Rail Lugs 6 pack of above lugs. Equip your fleet at a reduced price!

.

 $29.95
KL-1.0
Kwik Linksmall  0.2 oz.
 $1.29
KL-2.0
Kwik Linklarge  0.8 oz.
 $1.59
EYEBOLT-3/16-SET
Eye Bolt Set3/16-24  0.3 oz.
 $0.99
EYEBOLT-3/16
Eye Bolt3/16-24  0.2 oz.
 $0.69
NUT-3/16
Nut3/16-24  0.1 oz.
 $0.19
WASH-3/16
Washerfor eyebolt  0.2 oz.
 $0.19
UBOLT
U-Bolt5/16" dia. x 2" wide (center to center) x 2.750" long 
 $4.19
DRING-1.0
D-Ring, welded steel1 inch  0.2 oz.
 $0.79
SHC-2/56-4x1/4
Screw, Socket Head Cap, for altimeter mounting. Package of 4.2/56 x 1/4  
$0.49
SHC-2/56-4x3/8
Screw, Socket Head Cap, for altimeter mounting. Package of 4.2/56 x 3/8  
$0.49
SHSS-8/32-2x3/8
Socket Head Set Screw, for securing sled into payload tube. Package of 2.8/32 x 3/8  
$0.49
HDWE-NYN-4/40SS Nut, SS Nyloc type, 4/40 thread. 4 per pack. $0.49
HDWE-SHC-4/40SS Screw, Socket Head Cap, for mounting altimeters and timers to G- 10 sleds including eSled plate. 4/40 x 1/2". Requires 3/32" Hex Key. 4 per pack. $0.49
HDWE-SHC-4/40SS Screw, Socket Head Cap, for mounting altimeters and timers to G- 10 sleds including eSled plate. 4/40 x 1/2". Requires 3/32" Hex Key. 4 per pack. $0.49
HDWE-FH-2/56SS Screw, Socket Flat Head, for mounting battery holder to G-10 sleds including eSled plate. 4 per pack. 2/56 x 3/8". Requires 0.05" Hex Key. $0.49
HDWE-NYN-2/56SS Nut, SS Nyloc type, 2/56 thread. 4 per pack. $0.49
HDWE-NYN-4/40SS Nut, SS Nyloc type, 4/40 thread. 4 per pack. $0.49
HDWE-KEY-050 Key, Short Arm Hex, 0.05" for mounting screws HDWE-FH-2/56 $0.49
KEY-5/64
Key, Short Arm Hex, 5/64" for all altimeter mounting screws and set screws above.   
$0.49
HDWE-KEY-3/32 Key, Short Arm Hex, 3/32" for mounting screws HDWE-SHCS-4/40 $0.49

This site uses "Secure Server" Encryption Technology. Your transactions are secure.
Copyright © 1997-2015 Public Missiles, Ltd., all rights reserved.
Built and Hosted by The Blast Zone
Contact the Webmaster with any website questions or comments