A large selection of scale, semi-scale, and scale-like rocket kits for all experience levels.

1/6 Scale
Patriot Missile

After countless requests for a smaller version of this very popular rocket, we are happy to announce this beautiful, 1/6 semi-scale version of the Patriot Missile!

The PML 1/6 Patriot Missile stands 37" tall and is 2.6" dia. Comes standard with 29mm motor mount or optional 38mm mount.

If you choose to purchase the 1/6 Patriot with a 38mm MMT, for 29mm motors, purchase the easy to use HAMR-38 motor retainer and HAMR-ADPTR-38/29.
Standard features include:

Pre-slotted Quantum Tube airframe
G-10 fiberglass fins
Multi-panel nylon parachute

Explicit instructions
Painting and detailing sheet

Click here for the kit instructions
.

Diameter: 2.5" | Height: 37" | MMT: 29mm or 38mm
Parachute: 30" | Payload: None
Fin Array: 4 | Fin Thickness: 0.06"

The 1/6 PATRIOT is an easy to build, scale kit for Pre-Cert & Level 1 flights. This rocket stands 37" tall, is 2.5" diameter, and has a 4 fin design. This rocket comes standard with a 29mm or 38mm motor mount and can fly on F thru I motors. At ~24 oz., the 30" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Below you will find a number of upgrade options. Upgrading the parachute size may be necessary if you intend to build heavy or have a hard landing surface (i.e. gravel, pavement, desert playa, etc.). Some motors will accelerate this rocket to transonic or even supersonic velocities. Under these conditions, this kit may require the fin upgrade, foam encapsulation of the fin root, as well as other advanced construction skills.

Upgrades:
Upgrade 1/6 Patriot to 38mm Motor Mount - Free!
1/6 Patriot Upgrade, Add HAMR-29 Motor Retainer now and Save 15% - $24.60
1/6 Patriot Upgrade, Add HAMR-38 Motor Retainer now and Save 15% - $28.00
Add HAMR-38/29-ADPTR Motor Adapter (for HAMR-38-SET) Save 10% - $18.85

Add now and save:
Epoxy, Quick-Cure (5 min) - $16.99 (Normally $18.99)
Epoxy, Mid-Cure (15 min) - $16.99 (Normally $18.99)
Epoxy, Slow-Cure (30 min) - $16.99 (Normally $18.99)
Adjustable Density Expanding Foam - $16.99 (Normally $18.99)

Motor Recommendations | More Specifications

It is prudent to sim your kit/motor combination using the actual weight of your finished model to determine max velocity, altitude, ejection delay, etc. This will allow you to make an informed decision when selecting a suitable motor for your rocket. Please download and read the PML FAQ and/or consult with a NAR or Tripoli certified member to insure your flights are fun and safe.

$89.95

Striker

Striker is similar in styling to some of the most advanced and devastating weapons on the modern battle field! Not an inch of space is wasted inside of this rocket!

Striker utilizes our new Stuffer Tube Recovery design. Striker comes with a 38mm motor mount and Linear Rail Lugs as standard equipment.

To use 29mm motors in a 38mm mount, purchase the optional HAMR- 38-SET motor retainer and HAMR-ADPTR-38/29.

Click here for the kit instructions in PDF format; 7.0 Meg

Click here to download RockSim v8/9 data for this rocket

Diameter: 3.9" | Height: 36.5" | MMT: 38mm
Parachute: 36" | Payload: None
Fin Array: 4 | Fin Thickness: 0.06"

The STRIKER is a mean looking kit for Level 1 and 2 flights. This rocket stands 36.5" tall, is 3.9" diameter, and has a 4 fin design. This rocket comes standard with a 38mm motor mount and can fly on H thru J motors. At ~52 oz., the 36" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
Striker Upgrade, Add HAMR-38 Motor Retainer now and Save 15% - $28.00
Striker Upgrade, Add HAMR-38/29-ADPTR now and Save 10% - $18.85

Motor Recommendations | More Specifications

$139.95

AGM-256
Pit Bull

The AGM-256 Pit Bull features true Air Force like styling is sure to command attention on the flight line!

The Pit Bull is 35" tall and 2.6" in diameter. The Pit Bull weighs in at 29 ozs. This kit is also designed to fly on high impulse F and G motors for Pre-Cert flights and most H and I motors for Cert 1 flights. Pit Bull comes with a 38mm motor mount as standard equipment.

To use 29mm motors in a 38mm mount, purchase the optional HAMR- 38-SET motor retainer and HAMR-ADPTR-38/29.

Click here for the kit instructions in PDF format; 2.0 Meg

Click here to download RockSim v8/9 data for this rocket

Diameter: 2.56" | Height: 35" | MMT: 38mm
Parachute: 24" | Payload: None
Fin Array: 4 main and 4 canard | Fin Thickness: 0.06"

The AGM-256 is a great, scale-like kit for Pre-Cert & Level 1 flights. This rocket stands 35" tall, is 2.56" diameter, and has a 4 main and 4 canard fin design. This rocket comes standard with a 38mm motor mount and can fly on F thru H motors. At ~29 oz., the 24" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
AGM-256 Upgrade, Add HAMR-38 Motor Retainer now and Save 15% - $28.00
AGM-256 Upgrade, Add HAMR-38/29-ADPTR now and Save 10% - $18.85

Motor Recommendations | More Specifications

$129.95

Mini-BBX

The Mini BBX is very close to true scale and comes with detailed painting instructions.

This is the 2.1 inch version of our popular Black Brant X. The Mini BBX is perfect for Level 1 Cert flights as it flies using high-impulse G through I motors in its 29mm MMT. When you’re ready, the Mini BBX can be retrofitted with the CPR-3000 altimeter-based Close Proximity Recovery system. As if that weren’t enough, the tail cone at the base of the rocket is designed to fit the optional Terrier Booster Stage for a truly authentic Black Brant X two-stage flight. As you may have already suspected, the Mini BBX kit includes a Quantum Tube airframe, a specially designed tail cone, and G-10 fins. The payload bay measures 21.5". The Mini-BBX CANNOT use a motor retainer of any kind if it will someday be used with the Terrier booster. Sorry.

To purchase a Mini BBX already equipped with the CPR3000 Dual- Deployment Recovery System, click here.

Click here for the complete Data Sheet

Click here for the kit instructions

Diameter: 2.1" | Height: 61" | MMT: 29mm
Parachute: 30" | Payload: 21.5
Fin Array: 4 main and 4 canard | Fin Thickness: 0.06"

The MINI-BBX is a true scale kit for Pre-Cert & Level 1 flights. This rocket stands 61" tall, is 2.1" diameter, and has a 4 main and 4 canard fin design. This rocket comes standard with a 29mm motor mount and can fly on G thru I motors. At ~39 oz., the 30" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
Mini-BBX Parachute Upgrade (For Hard Surface Landings) from 30 to 36 - $6.00
Substitute Phenolic Airframe (for DIY fiberglassing only; see Complete FAQ) - $8.00

Motor Recommendations | More Specifications

$148.95

AMRAAM 2

By popular request, here`s a smaller version of our very popular AMRAAM-3 and AMRAAM-4 kits!

The AMRAAM-2 is designed specifically for flyers that want the great flights and military styling of the AMRAAM, but for smaller flying fields, smaller motors, or smaller budgets. It`s great for your first bigger bird, introducing a youngster or B.A.R. to higher-power rocketry, or when you want to wow `em with those great F and G motor flights on a smaller flying field. Flies great with 29mm F thru I motors.

Pre-slotted Quantum Tube airframe
G-10 fiberglass fins
Piston ejection system

Multi-panel nylon parachute
Plastic nosecone
Detailed decal sheet

Click here for the complete Data Sheet.

Click here for the kit instructions in PDF format.

Diameter: 2.1" | Height: 42" | MMT: 29mm
Parachute: 24" | Payload: None
Fin Array: 4 main and 4 canard | Fin Thickness: 0.06"

The AMRAAM 2 is a great 1st or 2nd midpower kit for Pre-Cert & Level 1 flights. This rocket stands 42" tall, is 2.1" diameter, and has a 4 main and 4 canard fin design. This rocket comes standard with a 29mm motor mount and can fly on F thru I motors. At ~24 oz., the 24" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
AMRAAM-2 Parachute Upgrade (For Hard Surface Landings) from 24 to 30 - $6.00
Amraam 2 Upgrade, Add HAMR-29 Motor Retainer now and Save 15% - $24.60
Substitute Phenolic Airframe (for DIY fiberglassing only; see Complete FAQ) - $8.00

Motor Recommendations | More Specifications

$96.95

AMRAAM 3

Public Missiles, Ltd., the innovators of high power rocketry, bring you this beautiful, semi-scale model of the AIM-120 AMRAAM Missile.

The AMRAAM 3 stands 61.2" tall! As with all PML kits, we use only the highest quality materials

Pre-slotted Quantum Tube airframe
G-10 fiberglass fins
"Kwik-Switch" motor mount for 29mm through 54mm motors
Piston ejection system
12" Payload Bay

Multi-panel nylon parachute
Payload section with plastic nosecone
Explicit instructions
Detailed decal sheet

Click here for the complete Data Sheet.

Click here for the kit instructions in PDF format; 146kb

Diameter: 3.0" | Height: 61.2" | MMT: 54/38/29mm Kwik-Switch
Parachute: 36" | Payload: 12"
Fin Array: 4 main and 4 canard | Fin Thickness: 0.06"

The AMRAAM 3 is an impressive, scale kit for Level 1 and 2 flights. This rocket stands 61.2" tall, is 3.0" diameter, and has a 4 main and 4 canard fin design. This rocket comes standard with a 54/38/29mm Kwik-Switch motor mount and can fly on H thru J motors. At ~ 51 oz., the 36" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
AMRAAM-3 Parachute Upgrade (For Hard Surface Landings) from 36 to 48 - $6.00
Amraam 3 Upgrade, Add HAMR-KS Motor Retainer now and Save 15% - $39.90
Substitute Phenolic Airframe (for DIY fiberglassing only; see Complete FAQ) - $8.00
Upgrade to Pre-Glassed Phenolic Airframe for Amraam 3 - $97.00

Motor Recommendations | More Specifications

$148.95

AMRAAM 4

PML is proud to offer this semi-scale model of the AIM-120 AMRAAM Missile standing 77.7" tall!

As with all PML kits, we use only the highest quality materials. To purchase a AMRAAM-4 kit already equipped with the PML CPR3000 Dual-Deployment Recovery System, click here AMRAAM-4 w/CPR3k.

Check out these features...

Pre-slotted Quantum Tube airframe
G-10 fiberglass fins
"Kwik-Switch" motor mount for H through J motors
Piston ejection system
28.5" Payload Bay

Multi-panel nylon parachute
Payload section with plastic nosecone
Explicit instructions
Detailed decal sheet

Click here for the complete Data Sheet.

Click here for the kit instructions in PDF format; 144kb

Diameter: 3.9" | Height: 77.7" | MMT: 54/38/29mm Kwik-Switch
Parachute: 54" | Payload: 28.5"
Fin Array: 4 main and 4 canard | Fin Thickness: 0.06"

The AMRAAM 4 is a very impressive, 1/2 scale kit for Level 1 and 2 flights. This rocket stands 77.7" tall, is 3.9" diameter, and has a 4 main and 4 canard fin design. This rocket comes standard with a 54/38/29mm Kwik-Switch motor mount and can fly on H thru J motors. At ~78 oz., the 54" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
AMRAAM-4 Parachute Upgrade (For Hard Surface Landings) from 54 to 60 - $35.00
Amraam 4 Upgrade, Add HAMR-KS Motor Retainer now and Save 15% - $39.90
Substitute Phenolic Airframe (for DIY fiberglassing only; see Complete FAQ) - $8.00
Upgrade to Pre-Glassed Phenolic Airframe for Amraam 4 - $158.00

Motor Recommendations | More Specifications

$228.95

Black Brant VB

An excellent semi-scale model of the Canadian
Black Brant Vb sounding rocket.

Can be flown on G, H & I motors. This is the easiest to build scale rocket we have to offer.
To use 29mm motors in a 38mm mount, purchase the optional HAMR- 38-SET motor retainer and HAMR-ADPTR-38/29.

Plastic nose cone
Heavy duty nylon parachute
Pre-slotted Quantum Tube airframe

Piston ejection system
Explicit instructions remove guesswork

Click here for the complete Data Sheet.

Click here for the kit instructions in PDF format; 2.7Mb

Diameter: 2.5" | Height: 51" | MMT: 38mm
Parachute: 30" | Payload: None
Fin Array: 3 swept back | Fin Thickness: 0.06"

The BLK BRANT VB is another easy to build kit for Pre-Cert & Level 1 flights. This rocket stands 51" tall, is 2.5" diameter, and has a 3 swept back fin design. This rocket comes standard with a 38mm motor mount and can fly on G thru I motors. At ~32 oz., the 30" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
Black Brant VB Parachute Upgrade (For Hard Surface Landings) from 30 to 36 - $6.00
Black Brant VB Upgrade, Add HAMR-38 Motor Retainer now and Save 15% - $28.00
Add HAMR-38/29-ADPTR Motor Adapter (for HAMR-38-SET) Save 10% - $18.85

Motor Recommendations | More Specifications

$99.95

D-region Tomahawk

An excellent 1/3 scale model of NASA`s single stage sounding rocket.

Standing 71" tall, this is a very stable design with lots of payload space.
Standard features include:

Pre-slotted Quantum Tube airframe
G-10 fiberglass fins
Multi-panel nylon parachute
21" Payload Bay

Payload section with plastic nosecone
Explicit instructions
Painting and detailing sheet
38mm motor mount standard

Click here for the complete Data Sheet

Click here for the kit instructions

Diameter: 3.0" | Height: 71" | MMT: 38mm
Parachute: 48" | Payload: 21"
Fin Array: 4 | Fin Thickness: 0.06"

The D REGION TOMAHAWK is a scale sounding rocket kit for Level 1 and 2 flights. This rocket stands 71" tall, is 3.0" diameter, and has a 4 fin design. This rocket comes standard with a 38mm motor mount and can fly on H thru J motors. At ~ 55 oz., the 48" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
D-Region Tomahawk Parachute Upgrade (For Hard Surface Landings) from 48 to 54 - $10.00
Tomahawk Upgrade, Add HAMR-38 Motor Retainer now and Save 15% - $28.00
Add HAMR-38/29-ADPTR Motor Adapter (for HAMR-38-SET) Save 10% - $18.85
Substitute Phenolic Airframe (for DIY fiberglassing only; see Complete FAQ) - $8.00
Upgrade to Pre-Glassed Phenolic Airframe for Tomahawk - $97.00

Motor Recommendations | More Specifications

$148.95

Bull Puppy

Based on the U.S. Air Force`s Bull Pup missile, this kit is visually exciting on the ground as well as in flight!

It`s perfect for beginners and experienced rocketeers alike. Don`t let the name fool you, this puppy is equipped with a 38mm motor mount and can be flown with 29mm motors using the optional HAMR adapter. Can be flown on G through I motors.

Dado-slotted Quantum Tube airframe for canard fins
Pre-slotted plastic boattail
G-10 Fiberglass fins
38mm motor mount

Piston ejection system
Multi-panel nylon parachute
Plastic nose cone

Though it is not mandatory, we recommend the use of our 2- Part Expanding Foam (available on the Adhesives Page of the webstore) to aid in bonding the main fins to the boattail.

Click here for the complete Data Sheet.

Click here for the kit instructions

Diameter: 3.0" | Height: 39" | MMT: 38mm
Parachute: 36" | Payload: None
Fin Array: 4 main and 4 canard | Fin Thickness: 0.06"

The BULL PUPPY is a great flying kit for Level 1 and 2 flights. This rocket stands 39" tall, is 3.0" diameter, and has a 4 main and 4 canard fin design. This rocket comes standard with a 38mm motor mount and can fly on G thru J motors. At ~32 oz., the 36" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
Bullpuppy Parachute Upgrade (For Hard Surface Landings) from 36 to 48 - $6.00
Bullpuppy Upgrade, Add HAMR-38 Motor Retainer now and Save 15% - $28.00
Add HAMR-38/29-ADPTR Motor Adapter (for HAMR-38-SET) Save 10% - $18.85
Substitute Phenolic Airframe (for DIY fiberglassing only; see Complete FAQ) - $8.00

Motor Recommendations | More Specifications

$129.95

Bull Puppy 2.1

Based on the U.S. Air Force`s Bull Pup missile, the Bull Puppy 2.1 is the latest addition to the Bull family of rocket kits.

A great starter kit with excellent styling and performance. This puppy is perfect for pre-cert F and G flights and smaller fields. Comes complete with military style decals and a pre- slotted plastic boattail.

Dado-slotted Quantum Tube airframe for canard fins
Pre-slotted plastic boattail
G-10 Fiberglass fins
29mm motor mount
Military-style decals included

Piston ejection system
Multi-panel nylon parachute
Plastic nose cone
Linear rail lugs

Though it is not mandatory, we recommend the use of our 2- Part Expanding Foam (available below) to aid in bonding the main fins to the boattail.

Click here for the complete Data Sheet
Click here for the kit instructions

Diameter: 2.1" | Height: 28" | MMT: 29mm
Parachute: 24" | Payload: None
Fin Array: 4 main and 4 canard | Fin Thickness: 0.06"

The BULLPUPPY2.1 is a small but mean looking kit for Pre-Cert & Level 1 flights. This rocket stands 28" tall, is 2.1" diameter, and has a 4 main and 4 canard fin design. This rocket comes standard with a 29mm motor mount and can fly on F thru I motors. At ~20 oz., the 24" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

Upgrades:
Bullpyppy2.1 Upgrade, Add HAMR-29 Motor Retainer now and Save 15% - $24.60

Motor Recommendations | More Specifications