PML offers three styles of rocket nosecones — plastic, fiberglass, and solid urethane.

 

PML plastic nosecones are precision molded and combine high strength, smoothness and ease of finishing. Our nosecone have a double eyelet design so that you can use one or both eyelets for securing your shock cord(s). While our rockets have been safely flown at Mach + speeds using our stock nosecones, it is recommended to foam fill them using the port in the aft of the cone. Nose weight can be added before foaming, if desired. Lastly, there are 2 sandable ribs on the shoulder for adjusting the fit of your nosecone to the airframe
.

.

.

.
Our Intelli-Cone is a plastic nose cone specially modified to house a variety of altimeters and data acquisition computers, eliminating the need for bulky conventional payload sections. There is plenty of room between the payload tube and nose cone body to mount LED indicator lights, temperature probes or other sensors. Easy to assemble and easy to use. Click here for the details of the Intellicone.

PML fiberglass nose cones are not only strong, light and easy to finish, they also are priced about the same as similar size plastic nosecones, except of course, our 11.41" nose cone which is the largest production nose cone in the industry! Our `glass nosecones are laid-up as one piece in a closed mold and are not 2 pieces glued together like some other nosecones.
Our 7.5" and 11.4" cones have strategically placed carbon fiber reinforcements to increase rigidity while keeping weight to a minimum.
Our `glass nosecones come complete with a pre-drilled 1/2" plywood bulkplate and a 2" U-Bolt set.

Urethane nosecones by PML are conical solid units for high speed, high altitude, minimum diameter rockets.

 

PML also carries an entire line of tail cones for reducing base drag on high performance rockets. All our tail cones are cast in one piece from light weight urethane. They can also be used as a "pass through" reducer for airframes. Each tailcone is 1.75" long with a 0.25" shoulder on the large diameter; there is no shoulder on the small diameter.

Boattails: Boattails are long, ogive shaped components that are attached to the tail end of the rocket and serve to reduce drag (and can add a "retro look" to the rocket). These boattails are made by modifying our existing line of nosecones. 2.1” through 3.9” boattails are made of plastic while our 6.0” and 7.5” boatails are fiberglass. Centering rings are included.

In most cases the tip is cut off at the point that will allow the motor mount tube to fit through the opening. In the larger 6.0 and 7.5" boattails, various motor mount sizes can be used with the appropriate centering ring placed in the opening at the base of the boattail. Unlike tailcones, the fins of the rocket are usually mounted through the boattail and to the motor mount tube.

You must order the appropriate number (3, 4 or 6) of SLOTTING-PNC (2.1-3.9" boattails) or SLOTTING-FNC (6.0 and 7.5" boattails) at the bottom of the page in the ordering area below. Slotting charges are not included in the pricing of the boattail since it varies (3, 4 or 6).

You will need to specify fin slotting specs by referring to the diagram below. You must specify the following in the Custom Order Details section of the checkout counter form.
-- Number of slots (3, 4 or 6)
-- Slot width
-- Length of slots.

.

Part#Description Dia. Exposed
Length
Weight Shoulder CostQty.

UNC-1.1-CON Urethane Conical Nosecone 1.145" 6.00" 2.2 oz. 1.5" $13.59
UNC-1.5-CON Urethane Conical Nosecone 1.525" 8.00" 4.3 oz. 1.5" $15.69
PNC-2.1 Plastic Nosecone 2.152" 9.50" 3.5 oz. 1.75" $13.95
PNC-2.5 Plastic Nosecone 2.560" 11.25" 5.4 oz. 2.0" $15.95
PNC-3.0 Plastic Nosecone 3.000" 13.25" 5.6 oz. 2.5" $19.95
PNC-3.9 Plastic Nosecone 3.900" 16.75" 10.0 oz. 3.0" $21.95
FNC-6.0 Fiberglass Nosecone 6.007" 24.00" 28.0 oz. 5.5" $104.99
FNC-7.5 Fiberglass Nosecone 7.512" 29.00" 44.0 oz. 6.0" $121.79
FNC-11.4 Fiberglass Nosecone 11.41" 42.00" 80.0 oz. 6.0" $235.99
FNC-11.4-HAR Fiberglass Nosecone - Harpoon Style 11.41" 23.00" 81.0 oz. 6.0" $235.99
IC-2.1-1.5 Intelli-Cone with 1.5"x7.0" Payload Bay 2.15" 9.5" 4.7 oz. 1.375" $29.99
IC-2.5-1.5 Intelli-Cone with 1.5"x8.0" Payload Bay 2.560" 11.25" 7.2 oz. 1.56" $32.99
IC-3.0-2.1 Intelli-Cone with 2.1"x8.5" Payload Bay 3.002" 13.25" 8.7 oz. 2.06" $38.99
IC-3.9-2.1 Intelli-Cone with 2.1"x14" Payload Bay 3.900" 16.75" 14.4 oz. 2.25" $40.99
TC-2.1-1.1 Urethane Tailcone - Fits 1.1 MMT 2.152" 1.75" 1.5 oz. --- $15.95
TC-2.5-1.1 Urethane Tailcone - Fits 1.1 MMT 2.560" 1.75" 2.7 oz. --- $16.95
TC-2.5-1.5 Urethane Tailcone - Fits 1.5 MMT 2.560" 1.75" 1.5 oz. --- $16.95
TC-3.0-1.5 Urethane Tailcone - Fits 1.5 MMT 3.002" 1.75" 2.8 oz. --- $16.95
TC-3.0-2.1 Urethane Tailcone - Fits 2.1 MMT 3.002" 1.75" 1.8 oz. --- $16.95
TC-3.9-2.1 Urethane Tailcone - Fits 2.1 MMT 3.900" 1.75" 3.6 oz. --- $18.95
TC-3.9-3.0 Urethane Tailcone - Fits 3.0 MMT 3.900" 1.75" 3.4 oz. --- $18.95
TC-2.1-1.1BBX Urethane Tailcone - Fits 1.1 MMT in MiniBBX 2.152" 1.75" 1.5 oz. 15/16" $17.95
TRANS-TERRIER Urethane Transition-Top of Terrier Booster

2.5" 1.4" 1.3 oz. 0" $9.95
BTL-2.1-1.1

Standard Plastic Boattail, 2.1-1.1
- Fits 2.1" airframe, 1.1" (29mm) MMT
- 5.375" long
- Slottable Region: From 0.375 To 4.375"
- Slot Widths: 0.062, 0.093, 0.125
- Weight: ~2.2 oz.

$16.79
BTL-2.5-1.1
Standard Plastic Boattail, 2.5-1.1
- Fits 2.5" airframe, 1.1" (29mm) MMT
- 7.5" long
- Slottable Region: From 0.375 To 6.375"
- Slot Widths: 0.062, 0.093, 0.125
- Weight: ~3.7 oz.
$18.99
BTL-2.5-1.5
Standard Plastic Boattail, 2.5-1.5
- Fits 2.5" airframe, 1.5" (38mm) MMT
- 5.75" long
- Slottable Region: From 0.375 To 4.875"
- Slot Widths: 0.062, 0.093, 0.125
- Weight: ~3.0 oz.
$18.89
BTL-3.0-1.1
Standard Plastic Boattail, 3.0-1.1
- Fits 3.0" airframe, 1.1" (29mm) MMT
- 9.5" long
- Slottable Region: From 0.375 To 7.375"
- Slot Widths: 0.062, 0.093, 0.125
- Weight: ~4.3 oz.
$23.09
BTL-3.0-1.5
Standard Plastic Boattail, 3.0-1.5
- Fits 3.0" airframe, 1.5" (38mm) MMT
- 8.625" long
- Slottable Region: From 0.375 To 7.375"
- Slot Widths: 0.062, 0.093, 0.125
- Weight: ~4.0 oz.
$23.09
BTL-3.9-1.5
Standard Plastic Boattail, 3.9-1.5
- Fits 3.9" airframe, 1.5" (38mm) MMT
- 12.25" long
- Slottable Region: From 0.375 To 11.375"
- Slot Widths: 0.062, 0.093, 0.125
- Weight: ~7.2 oz.
$25.19
BTL-3.9-2.1
Standard Plastic Boattail, 3.9-2.1
- Fits 3.9" airframe, 2.1" (54mm) MMT
- 10.5" long
- Slottable Region: From 0.375 To 9.375"
- Slot Widths: 0.062, 0.093, 0.125
- Weight: ~6.1 oz.
$25.19
SLOTTING-PNC
Plastic Boattail Slotting - 2.1" through 3.9" diameter
When ordering a boattail, you must order the total number of slots you need in the quantity box to the right; price listed is PER SLOT.

$2.50
BTL-6.0-1.5

Fiberglass Boattail, 6.0-1.5
- Fits 6.0" airframe, 1.5" (38mm) MMT
- 14.75" long
- Slottable Region: From 1.0 To 13.0"
- Slot Widths: 0.093, 0.125
- Weight: ~22 oz.

$115.49
BTL-6.0-2.1
Fiberglass Boattail, 6.0-2.1
- Fits 6.0" airframe, 2.1" (54mm) MMT
- 14.75" long
- Slottable Region: From 1.0 To 13.0"
- Slot Widths: 0.093, 0.125
- Weight: ~22 oz.
$115.49
BTL-6.0-3.0
Fiberglass Boattail, 6.0-3.0
- Fits 6.0" airframe, 3.0" (75mm) MMT
- 14.75" long
- Slottable Region: From 1.0 To 13.0"
- Slot Widths: 0.093, 0.125
- Weight: ~22 oz.
$115.49
BTL-6.0-3.9
Fiberglass Boattail, 6.0-3.9
- Fits 6.0" airframe, 3.9" (98mm) MMT
- 14.25" long
- Slottable Region: From 1.0 To 13.0"
- Slot Widths: 0.093, 0.125
- Weight: ~19.6 oz.
$115.49
BTL-7.5-1.5
Fiberglass Boattail, 7.5-1.5
- Fits 7.5" airframe, 1.5" (38mm) MMT
- 22.0" long
- Slottable Region: From 1.0 To 21.0"
- Slot Widths: 0.093, 0.125
- Weight: ~46.8 oz.
$136.49
BTL-7.5-2.1
Fiberglass Boattail, 7.5-2.1
- Fits 7.5" airframe, 2.1" (54mm) MMT
- 22.0" long
- Slottable Region: From 1.0 To 21.0"
- Slot Widths: 0.093, 0.125
- Weight: ~46.8 oz.
$146.49
BTL-7.5-3.0
Fiberglass Boattail, 7.5-3.0
- Fits 7.5" airframe, 3.0" (75mm) MMT
- 22.0" long
- Slottable Region: From 1.0 To 21.0"
- Slot Widths: 0.093, 0.125
- Weight: ~46.8 oz.
$136.49
BTL-7.5-3.9
Fiberglass Boattail, 7.5-3.9
- Fits 7.5" airframe, 3.9" (98mm) MMT
- 21.5" long
- Slottable Region: From 1.0 To 21.0"
- Slot Widths: 0.093, 0.125
- Weight: ~39.0 oz.
$136.49
SLOTTING-FNC
Fiberglass Boattail Slotting - 6.0" through 11.4" diameter
When ordering a boattail, you must order the total number of slots you need in the quantity box to the right; price listed is PER SLOT.
$6.00

This site uses "Secure Server" Encryption Technology. Your transactions are secure.
Copyright 1997-2015 Public Missiles, Ltd., all rights reserved.
Built and Hosted by The Blast Zone
Contact the Webmaster with any website questions or comments