Big Advanced 6.0 Rocket Kits //

Home
 
All Rocket Kits
 
Airframes Composites Payload Bays Nosecones Recovery G-10 Fins Rings & Plates Motor Mounts Motor Retainers CPR Systems Staging Electronics Adhesives Hardware Igniters PML Gear Decal Sheets Gift Certificates Surplus Center
Enjoy your flight!

 PML Advanced 6" diameter rocket kits are perfect for Level 2 and 3 Cert flights.

 

AGM-600 PitBull

The AGM-600 is a huge 6" version
of our popular AGM-256 PitBull!

The AGM-600 is a large 6" version of our AGM-256 PitBull. The AGM- 600 PitBull comes complete with fiberglass nosecone and boattail. The 54mm motor mount can handle any motor up to about 30" long (click on Motor Recommendations below for details), and comes with a 72" `chute for motor-based recovery. Also included are 0.093" G10 fins, PML`s piston ejection system, and of course the attention to quality and detail that sets PML ahead of the pack!

The CPR-MAX Electronic Recovery System cannot be added to the AGM-600 without major modifications that make it unfeasible. Sorry.

Click here for the kit instructions.

Diameter: 6.0 in. | Height: 79 in. | MMT: 54mm
Parachute: 72" | Payload: None
Fin Array: 4 main and 4 canard | Fin Thickness: 0.09"

The AGM600 is a beautiful, scale-like kit for Level 2 flights. This rocket stands 79 in. tall, is 6.0 in. diameter, and has a 4 main and 4 canard fin design. This rocket comes standard with a 54mm motor mount and can fly on I thru K motors. At ~193 oz., the 72" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

 
Below you will find a number of upgrade options. Upgrading the parachute size may be necessary if you intend to build heavy or have a hard landing surface (i.e. gravel, pavement, desert playa, etc.). Some motors will accelerate this rocket to transonic or even supersonic velocities. Under these conditions, this kit may require the fin upgrade, foam encapsulation of the fin root, as well as other advanced construction skills.

Upgrades:
AGM-600 Fin Upgrade From 0.093 To 0.125 - $27.48
AGM-600 Parachute Upgrade from 72 to 84 - $40.00
Upgrade to Pre-glassed Phenolic Airframe - $186.34
Add HAMR-54 Motor Retainer now and save 15%! - $31.40

Select only one of the following upgrades for this kit
AGM-600 MMT Upgrade to Single 75mm - $14.00
AGM-600 MMT Upgrade to Single 98mm - $15.00
AGM-600 MMT Upgrade to Single 75mm GiantKS (w/o Adapters) - $31.00
AGM-600 MMT Upgrade to Single 98mm GiantKS (w/o Adapters) - $32.00


Add now and save:
Epoxy, Quick-Cure (5 min) - $16.99         (Normally $18.99)
Epoxy, Mid-Cure (15 min) - $16.99         (Normally $18.99)
Epoxy, Slow-Cure (30 min) - $16.99         (Normally $18.99)
Adjustable Density Expanding Foam - $16.99         (Normally $18.99)


 
It is prudent to sim your kit/motor combination using the actual weight of your finished model to determine max velocity, altitude, ejection delay, etc. This will allow you to make an informed decision when selecting a suitable motor for your rocket. Please download and read the PML FAQ and/or consult with a NAR or Tripoli certified member to insure your flights are fun and safe.

$489.95



Ultimate Endeavour

If bigger is better and clustering is the key to your high power excitement, then the Ultimate Endeavour is the ticket!
Upgradable for Level 3 cert flight!

Straightforward construction and excellent flight stability are combined with military styling to provide you with quick access to the world of large scale high power rocketry. Initial flights can be accomplished with a single 54mm motor. When you are ready to kick it in the butt, you can add a cluster of 38mm motors to the central 54mm for a real neck- snapping launch!

CPR-MAX Upgrade available!

You can now add the CPR-MAX Electronic Recovery System as an upgrade to the Ultimate Endeavour for 10% off the regular price of CPR-MAX-6.0! (NOTE: The airframe(s) will need to be cut differently from a stock Ultimate Endeavour, so it`s important to order CPR-MAX as an upgrade with your initial order.) For more details on CPR-MAX, go to the CPR Systems page.

Click here for the kit instructions.

Diameter: 6.0 in. | Height: 108 in. | MMT: 54mm w/(3) 38mm
Parachute: 60" & 48" | Payload: 36"
Fin Array: 3 (Split-fin) | Fin Thickness: 0.09"

The ULT. ENDEAVOUR is a huge, cluster-capable kit for Level 2 and 3 (with full upgrades) flights. This rocket stands 108 in. tall, is 6.0 in. diameter, and has a 3 (Split-fin) fin design. This rocket comes standard with a 54mm w/(3) 38mm motor mount and can fly on I thru K + 3 outboards motors. At ~173 oz., the 60" & 48" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with our exclusive Linear Rail Lugs for use with 80/20 brand launch rails. The stock airframe is ideal for flights up to approx. 0.85 Mach.

 
Below you will find a number of upgrade options. Upgrading the parachute size may be necessary if you intend to build heavy or have a hard landing surface (i.e. gravel, pavement, desert playa, etc.). Some motors will accelerate this rocket to transonic or even supersonic velocities. Under these conditions, this kit may require the fin upgrade, foam encapsulation of the fin root, as well as other advanced construction skills.

Upgrades:
Ultimate Endev. Chute Upgrade (For Hard Surface Landings) from 48&60 to 54&72 - $45.00
Ultimate Endeavour Fully Fiberglassed Airframe (Includes Double-Wall Coupler) - $236.34
Ultimate Endeavour Fin Upgrade From 0.093 To 0.125" Thickness - $27.16
Ultimate Endeavour Upgrade to CPR-MAX Altimeter Based Chute Deployment System - $148.45

Select only one of the following upgrades for this kit
Ultimate Endeavour MMT Upgrade to Single 75mm - $7.73
Ultimate Endeavour MMT Upgrade to Single 98mm - $8.73
Ultimate Endeavour MMT Upgrade to Single 75mm GiantKS (w/o Adapters) - $24.73
Ultimate Endeavour MMT Upgrade to Single 98mm GiantKS (w/o Adapters) - $25.73


Add now and save:
Epoxy, Quick-Cure (5 min) - $16.99         (Normally $18.99)
Epoxy, Mid-Cure (15 min) - $16.99         (Normally $18.99)
Epoxy, Slow-Cure (30 min) - $16.99         (Normally $18.99)
Adjustable Density Expanding Foam - $16.99         (Normally $18.99)


 
It is prudent to sim your kit/motor combination using the actual weight of your finished model to determine max velocity, altitude, ejection delay, etc. This will allow you to make an informed decision when selecting a suitable motor for your rocket. Please download and read the PML FAQ and/or consult with a NAR or Tripoli certified member to insure your flights are fun and safe.

$399.95



Share PublicMissiles.com
Information about PML and our products
External resources
This site uses "Secure Server" Encryption Technology.
Your transactions are secure.
Copyright © 1997-2021 Public Missiles Ltd.
All rights reserved.
Built and Hosted by The Blast Zone
Contact the Webmaster with any website questions or comments